More power and light weight. In the past, these two characteristics in electronics were mutually exclusive. Now, micro-electronics are just that, and in addition, need thermal interface materials to further complement these objectives. 
SARCON® Thermal Interface Materials are an advanced silicone rubber with high thermal conductivity and superior flame-retardancy. By combining the inherent silicone rubber properties of heat resistance, electrical insulation and long-term aging into one compound, this universally applicable thermal interface material can be made in an unlimited number of thermal management configurations. APPLICATIONS: - Thermal conductive insulators for semiconductors
- Compression jointing materials for thermistors and temperature sensors
- Thermal conductive material for all types of heaters
AVAILABLE CONFIGURATIONS: - Sheets, Rolls, Die-cuts, Sleeves, Gel, Extrusions, Moldings
SARCON:
THIN-PROFILE (.006" - .033")
| Formulations |
Application Guidelines |
Thermal Conductivity Cal/cm " sec " C |
Thermal Conductivity W/m " K |
| SARCON TR |
General purpose for moldings and extrusions |
2.9x10-³ |
1.20 |
| SARCON HR |
High heat conductivity |
4.1x10-³ |
1.70 |
| SARCON UR |
Very high heat conductivity |
6.2x10-³ |
2.60 |
| SARCON QR |
Low hardness with high heat conductivity |
2.6x10-³ |
1.10 |
| SARCON GR-TD |
High heat conductivity mesh reinforced gap filler pad, 0.25mm thin, available in rolls |
3.6x10-³ |
1.50 |
| SARCON GTR |
General purpose extrusion with 0.05 mm glass cloth reinforcement |
2.2x10-³ |
0.90 |
| SARCON GHR |
High heat conductivity with 0.05 mm glass cloth reinforcement |
3.4x10-³ |
1.40 |
| SARCON GSR |
Highest heat conductivity with 0.05 mm glass cloth reinforcement |
7.0x10-³ |
2.90 | SARCON:
GAP FILLER PAD (.012" - .200")
| Formulations |
Application Guidelines |
Thermal Conductivity Cal/cm " sec " C |
Thermal Conductivity W/m " K |
| SARCON GR-B |
High heat conductivity gap filler pad |
5.5x10 |
2.30 |
| SARCON GR-C |
Electromagnetic wave absorption gap filler pad (20dB RFI shielding effectiveness up to 1GHz) |
2.9x10³ |
1.20 |
| SARCON GR-D |
General purpose gap filler pad |
3.6x10³ |
1.50 |
| SARCON GR-K |
General purpose gap filler pad, UL94 V0-V1 class |
2.10x10³ |
1.20 |
| SARCON GR-L |
General purpose gap filler pad, UL94 V0 class |
6.8x10³ |
2.80 |
| SARCON GR-M |
High heat conductivity gap filler pad |
14.4x10³ |
6.0 |
| SARCON XR-E |
Extremely high heat conductivity |
26.3x10³ |
11.0 |
| SARCON XR-J |
Highest performance heat conductivity gap filler pad |
33.4x10³ |
14.0 |
| SARCON XR-M |
New low thermal resistance gap filler pad |
40.8x10³ |
17.00 |
| SARCON NR-C |
Highly comfortable non-flammable (non-silicone) gap filler pad |
3.6x10³ |
1.50 | Variations:
| SARCON GR |
Unmodified GR formulas |
| SARCON GR-H |
Hardened surface on one side for easier disassembly |
| SARCON GR-F |
Fiberglass reinforced center to prevent elongation |
| SARCON GR-HF |
Incorporates benefits of both GR-H and GR-F |  
THERMAL CONDUCTIVITY CONVERSION TABLE
| Thermal Conductivity |
BTU-in/hrft²F |
Cal/cm sec °C |
Watt/m K |
BTU-in/hrft²F |
1 |
3.4x10^-4 |
0.14 |
| Cal/cm sec °C |
2.9x10^3 |
1 |
4.2x10^2 |
| Watt/m K |
6.9 |
2.4x10^-3 |
1 |
 Fujipoly Announces its Partnership with OSRAMFujipoly is a certified partner of OSRAM’s “LED Light for you” network. As a member of this network, Fujipoly is committed to supporting your LED design anywhere in the world. |
